Blog archive

Popular tags

Modeling and Optimization of Unconventional Oil Production 06.04.2017 Rene Reiter

Canada's oil reserves are third only to Venezuela and Saudi Arabia, and over 95% of these reserves are in the oil sands deposits in the province of Alberta. Oil sands are a deposit of loose sand or partially consolidated sandstone containing petroleum or other hydrocarbons which require in situ methods for production. The in situ method is more costly than the mining method, but it's much less damaging to the environment, requiring only a few hundred meters of land and a nearby water source to operate. It's estimated by the Alberta government that 70-80% of oil in the oil sands is buried too deep for open pit mining; therefore, in situ methods will likely be the future of extracting oil from oil sands. The most common form of in situ is called Steam Assisted Gravity Drainage (SAGD). With the SAGD technique, a pair of horizontal wells, situated 4 to 6 meters above the other, is drilled from a central well pad. In a plant nearby, water is transformed into steam which then travels through above-ground pipelines to the wells and enters the ground via a steam injection (top) well. [...]
» READ MORE

Applying Simulation to the Oil and Gas Industry 07.01.2016 Rene Reiter

For any industry, adopting new technology can be costly both in time, and money. As most of you know, adopting simulation modeling is the way around making costly unnecessary changes and depleting human resources. New to the simulation and modeling concept as a decision-making and problem-solving tool, is the oil & gas industry. Alvaro Gil from Steam Systems Ltd. guides us through the implementation of simulation modeling, the data behind the models, bumps in the road, and ultimately the return on investment. Utilizing simulation and modeling to address oil & gas industry challenges, Stream Systems helps clients realize billions of dollars in cost-savings.[...]
» READ MORE

Implementation of Complex High-Fidelity Terminal Simulation Models 10.12.2015 Rene Reiter

The design and development of a new tank terminal, an extension to an existing tank terminal, or the optimization of a current facility is a large undertaking. The typical project has to deal with numerous design challenges and design trade-offs. Simulation is the only effective way to understand how the various terminal components (tanks, manifolds, transfer lines, pipelines, etc.) interact and how they are affected by controllable and non-controllable events. At the AnyLogic Conference 2014, Allan Chegus, CEO, and Dumitru from Stream Systems, Ltd. demonstrated how simulation models can be used to increase throughput, improve operating efficiency, and reduce cost by avoiding unnecessary capital expenditures.[...]
» READ MORE